Common Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is made to operate materials dealing with gear. The reducing motion is achived from the solenoid valve using the lowering velocity controlled by an adjustable needle valve. The left and ideal functions are equipped using a dual pilot operated check valve and cross-over relief valves.
Remark: Please seek the advice of our sales engineer for the diverse pump displacement, motor energy or tank capacity.
Unique Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities.N46 hydraulic oil is suggested.
4. This electrical power unit should be mounted horizontal.
5. Check the oil degree within the 
tank after the 1st commence on the electrical power unit.
six. Oil shifting is required following the preliminary 100 operation hours, afterwards as soon as each and every 3000 hrs.
SNOW PLOW Energy UNIT
Tags: