DUMP TRAILER Energy UNIT-DOUBLE ACTING
This power unit has a energy up power down circuit with load holding on the two A & B ports. A strain compensatred flow control might be additional to circuit to control the decent pace on the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned just before set up of the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities. N46 hydraulic oil is suggested.
4. The energy unit needs to be mounted horizontally.
five. Check the oil degree from the tank just after the original running in the energy unit.
six. Oil transforming is needed right after the initial one hundred operation hrs, afterwards when every single 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
This energy unit features a energy up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be supplied if demanded. Also a stress compen sated flow manage might be additional for the circuit to manage the descent pace of the cylinder.
Remark: Please check with our product sales engineer for your distinctive pump displacement, motor energy or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
four. The energy unit needs to be mounted horizontally.
five. Check the oil degree within the tank soon after the initial running of the energy unit.
6. Oil shifting is required after the preliminary one hundred operation hours, afterwards the moment each 3000 hrs.