1.A connecting link of an O-ring Chain for standard application is pre-coated with grease in the pins. Before connection, verify the grease around the surfaces of pins, and in the event the amount of grease is small, apply grease with bare hands. (If gloves are applied, the grease is going to be absorbed by the gloves.)
Instance: Once the connecting website link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots with the pins. If your O-rings come loose because of vibration during transport, refit the O-rings in to the roots of your pins.
In this case, make sure to return the grease collected on the roots of the pins for the central surfaces on the pins, far more at portion A than at portions B proven during the above illustration. (Portions A is worn as a result of sliding with all the bushings.)
two.The chain is usually most quickly connected to the teeth of a sprocket. Engage the hyperlinks at the two ends with the chain with all the sprocket teeth and fit connecting pins. When the sprocket may be moved, the chain can also be connected on the loosened side.
three. Connecting procedure
one.Verify that O-rings are connected towards the roots from the pins.
2.When the level of grease utilized to the connecting pins is tiny, coat the pins with grease at the central portions.
3.Insert the connecting pins in to the bushings of the inner links at each ends.
four.Confirm that the grease is applied to your whole encounter with the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and while pressing the connecting plate, install the spring clip. Verify whether the head (the end without a split) on the spring clip is turned inside the feeding course in the chain. (See the next illustration.)
six.Be sure you verify that the spring clip is securely fitted inside the clip grooves of your connecting pins.
This completes jointing on the connecting website link. Note that grease around the surfaces of connecting pins and O-rings can be eliminated through installation get the job done. In this instance, re-grease using the grease to the surface in the base chain or even the grease while in the polyethylene bag during which the connecting website link was contained.