Rubber Coupling Elements, Rubber Coupling SpideStrength factory r, PU Coupling Element, PU Coupling Spider

Design NO. 3A2006 Shade Black, Yellow, Red Tensile Power eight-55MPa Hardness 70, ninety, ninety five, 98shore a Elongation Optimum 690% Density 1.25g/cm3 Dimension Standard Measurement of Mh45-200 Trademark 3A Rubber Transportation Deal Packing in Cartons Specification Normal Dimensions Origin China

Product Description

Rubber Coupling Aspects, Rubber Coupling Spider, PU Coupling Element, PU Coupling Spider

Description: the polyurethane elastomeric is a new content of polymer artificial in between rubber and plastic. It has both substantial toughness of plastic and high elasticity of rubber. Its characteristics are: 1, a wide selection of hardness. It nevertheless has rubber elongation and resilience at higher hardness. The polyurethane elastomeric has a hardness selection of Shore A10-D80. two. high power. At rubber hardness, the tensile toughness, tear power and load carrying capability are considerably greater than standard rubber content. At substantial hardness, its influence power and flexural strength are considerably greater than plastic substance. three, put on-resistant. Its use resistance is quite exceptional, typically in the range of .01-.10cm3/1.61km, about 3-5 times than rubber materials. four, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has minimal affinity with non-polar mineral oil and is hardly eroded in gas oil and mechanical oil. five, good resistance to oxygen and ozone. six, excellent vibration absorption performance, can do damping and buffering. In the mildew manufacturing sector, it replaces rubber and springs.7, has excellent minimal temperature functionality. eight, radiation resistance. Polyurethane is extremely resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. nine, with good machining efficiency.

The polyurethane coupling, rubber coupling are made by injection with large quality TPU material or mould CSM/SBR. It is developing and special for all kinds of steel shaft coupling with really good functionality of high tensile toughness, high put on resistant, large elastic resilience, water resistant, oil resistant and outstanding fatigue resilience, large influence resistant and so on. We have complete sets injection moulds and offer complete variety of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J series couplings and many others. with large high quality and excellent knowledge. Implement to all types of industrial metal shaft coupling.

Technical specs:

content: TPU, CSM/SBR, NBR, nylon and many others.

colour: yellow, purple, purple, eco-friendly, black, beige and many others.

floor: sleek

tensile toughness: eight-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: 1.25g/cm3

elasticity effect: &gt25%

tear toughness: 35-155KN/m

akron abrasion loss:&lt0.05cm3/one.61km

compression set (22h*70&degC):&lt10%

operating temperature: 120&degC

regular measurement for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190,T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

normal dimensions for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-ten, NOR-MEX214-ten, NOR-MEX240-ten, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #one, #2, #3, #four, #5, #6, #eight

GR42, GR48, GR55, GR65, GR75

DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11

normal measurement for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in baggage, cartons, pallets or crates

OEM &amp tailored dimension are agreed

particular source all kinds of steel coupling for FCL, NM, MH, HRC, Enjoy Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls validate type, dimension number and amount***

Standard Info.

Model NO. 3A2006 Coloration Black, Yellow, Red Tensile Power eight-55MPa Hardness 70, 90, 95, 98shore a Elongation Highest 690% Density 1.25g/cm3 Size Regular Size of Mh45-200 Trademark 3A Rubber Transportation Bundle Packing in Cartons Specification Common Dimension Origin China

Merchandise Description

Customer Query &amp Reply Ask anything for far more details ()

Rubber Coupling Elements, Rubber Coupling Spider, PU Coupling Aspect, PU Coupling Spider

Description: the polyurethane elastomeric is a new content of polymer synthetic among rubber and plastic. It has both high strength of plastic and large elasticity of rubber. Its traits are: 1, a wide range of hardness. It still has rubber elongation and resilience at substantial hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. two. high energy. At rubber hardness, the tensile power, tear energy and load carrying ability are considerably larger than general rubber materials. At high hardness, its influence power and flexural power are considerably increased than plastic materials. 3, put on-resistant. Its put on resistance is extremely outstanding, usually in the assortment of .01-.10cm3/one.61km, about 3-five times than rubber substance. 4, oil resistant. The polyurethane elastomeric is a hugely polar polymer compound which has reduced affinity with non-polar mineral oil and is hardly eroded in gasoline oil and mechanical oil. 5, good resistance to oxygen and ozone. six, outstanding vibration absorption efficiency, can do damping and buffering. In the mold manufacturing market, it replaces rubber and springs.seven, has great minimal temperature functionality. eight, radiation resistance. Polyurethane is extremely resistant to higher vitality radiation and has satisfactory overall performance at ten-10 deg radiation dose. nine, with excellent machining efficiency.

The polyurethane coupling, rubber coupling are created by injection with substantial top quality TPU content or mould CSM/SBR. It is developing and unique for all types of metallic shaft coupling with very good efficiency of substantial tensile strength, large use resistant, substantial elastic resilience, water resistant, oil resistant and outstanding exhaustion resilience, large affect resistant and so forth. We have complete sets injection moulds and provide complete assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J collection couplings and so forth. with high quality and superb knowledge. Use to all types of industrial metal shaft coupling.

Specs:

content: TPU, CSM/SBR, NBR, nylon and so forth.

colour: yellow, red, purple, inexperienced, black, beige and so on.

surface area: clean

tensile strength: eight-55Mpa

hardness: 70-98Shore A

elongatsplit sprocket,roller chains sprocket,specification regular chains sprocket,bulldozer sprocket,tapered bore sprocket,blank sprockets,industrial sprockets,standard sprocket,conveyor sprockets,idler sprockets,spline shaft with sprocket,roller chain idler sprocket,excavator monitor sprockets,chain sprocket package,belts generate sprockets,weld on sprocket,chain sprockets with bearing,sprockets for conveyor,sprockets assembly,sprocket flat prime chains,large sprocket, double row sprocket,solitary sprocket,excavator sprocket wheel,triplex sprockets,forged iron sprocket,agricultural chain sprocket,timing sprocket,ansi normal for sprocket,stainless steel sprocket chain sprocket,substantial high quality sprockets,sprockets with spline,roller sprocket,agricultural machinery sprockets,transmission sprocket,industrial chain sprocket,wheel sprocket,ansi sprockets,chain wheel sprocket,sprocket plate wheel duplex sprocketion: 400%-650%

density: one.25g/cm3

elasticity influence: &gt25%

tear energy: 35-155KN/m

akron abrasion decline:&lt0.05cm3/one.61km

compression established (22h*70&degC):&lt10%

doing work temperature: one hundred twenty&degC

standard size for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/a hundred, L1We are producer, engineer had prosperous expertise above 20 many years. 10, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190,T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8We manufacture high good quality universal joints for numerous cars, construction machinery and equipment. All products are constructed with rotating lighter.H, 9H, 10H, 11H

common measurement for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-10, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #2, #3, #four, #5, #6, #eight

GR42, GR48, GR55, GR65, GR75

DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11

standard size for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in bags, cartons, pallets or crates

OEM &amp customized dimensions are agreed

particular offer all varieties of metal coupling for FCL, NM, MH, HRC, Really like Joy, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls verify variety, measurement number and amount***

Tags:

rubber coupling

As one of leading rubber coupling manufacturers, suppliers and exporters of products, We offer rubber coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rubber coupling

Recent Posts