L Type PU Coupling, PU Spihigh quality der, Polyurethane Coupling, Polyurethane Spider

Model NO. 3A2006 Trademark 3A Rubber Specification Standard Dimensions Origin China HS Code 39269010

Item Description

L Type PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider (3A2006)

Description: the polyurethane elastomeric is a new material of polymer synthetic in between rubber and plastic. It has equally high toughness of plastic and higher elasticity of rubber. Its traits are: one, a extensive range of hardness. It still has rubber elongation and resilience at higher hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. 2. high strength. At rubber hardness, the tensile power, tear strength and load carrying capability are much greater than common rubber content. At large hardness, its influence strength and flexural strength are a lot greater than plastic substance. three, use-resistant. Its put on resistance is extremely outstanding, generally in the selection of .01-.10cm3/1.61km, about three-5 moments than rubber material. 4, oil resistant. The polyurethane elastomeric is a extremely polar polymer compound which has minimal affinity with non-polar mineral oil and is hardly eroded in gasoline oil and mechanical oil. 5, excellent resistance to oxygen and ozone. 6, outstanding vibration absorption efficiency, can do damping and buffering. In the mold manuf It is planning and particular for all kinds of steel shaft coupling with very excellent performance of high tensile strength, large put on resistant, high elastic resilience, drinking water resistant, oil resistant and superb exhaustion resilience, high influence resistant etc. We have full sets injection moulds and provide total range of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J collection couplings and so forth. with substantial good quality and exceptional encounter. Implement to all types of industrial metallic shaft coupling.acturing industry, it replaces rubber and springs.7, has excellent low temperature overall performance. 8, radiation resistance. Polyurethane is highly resistant to high vitality radiation and has satisfactory performance at 10-ten deg radiation dose. nine, with very good machining functionality.

The polyurethane coupling, rubber coupling are made by injection with higher good quality TPU substance or mould CSM/SBR. It is designing and special for all varieties of steel shaft coupling with extremely great efficiency of high tensile energy, substantial dress in resistant, high elastic resilience, drinking water resistant, oil resistant and superb exhaustion resilience, high affect resistant and so forth. We have total sets injection moulds and offer total assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J collection couplings and so forth. with large high quality and superb expertise. Apply to all varieties of industrial metallic shaft coupling.

Specifications:

substance: TPU, CSM/SBR, NBR, nylon and so on.

shade: yellow, red, purple, eco-friendly, black, beige etc.

floor: sleek

tensile strength: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: one.25g/cm3

elasticity impact: &gt25%

tear toughness: 35-155KN/m

akron abrasion reduction:&lt0.05cm3/1.61km

compression established (22h*70&degC):&lt10%

operating temperature: one hundred twenty&degC

common dimension for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

standard dimension for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-ten, NOR-MEX214-ten, NOR-MEX240-10, NOR-MEX265-ten

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #two, #three, #4, #five, #6, #8

GR42, GR48, GR55, GR65, GR75

normal measurement for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NLWith “Consumer 1st, quality initial”10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM &amp personalized size are agreed

unique provide all types of metal coupling for FCL, NM, MH, HRC, Really like Joy, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls validate variety, dimensions quantity and quantity***

Basic Data.

Product NO. 3A2006 Trademark 3A Rubber Specification Common Size Origin China HS Code 39269010

Product Description

Buyer Issue &amp Response Ask one thing for far more particulars ()

L Variety PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider (3A2006)

Description: the polyurethane elastomeric is a new material of polymer artificial between rubber and plastic. It has each higher energy of plastic and high elasticity of rubber. Its qualities are: 1, a wide selection of hardness. It nonetheless has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. 2. high power. At rubber hardness, the tensile toughness, tear strength and load carrying ability are much greater than general rubber materials. At substantial hardness, its affect power and flexural energy are considerably greater than plastic materials. 3, dress in-resistant. Its use resistance is quite excellent, typically in the range of .01-.10cm3/1.61km, about 3-5 occasions than rubber material. 4, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has lower affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, great resistance to oxygen and ozone. six, superb vibration absorption performance, can do damping and buffering. In the mold producing business, it replaces rubber and springs.7, has very good low temperature overall performance. eight, radiation resistance. Polyurethane is extremely resistant to substantial energy radiation and has satisfactory functionality at 10-10 deg radiation dose. 9, with excellent machining efficiency.

The polyurethane coupling, rubber coupling are made by injection with substantial quality TPU substance or mould CSM/SBR. It is designing and specific for all kinds of steel shaft coupling with very excellent performance of large tensile toughness, higher wear resistant, high elastic resilience, drinking water resistant, oil resistant and exceptional fatigue resilience, high affect resistant and so forth. We have complete sets injection moulds and offer total assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J series couplings and many others. with high high quality and outstanding expertise. Apply to all kinds of industrial steel shaft coupling.

Requirements:

material: TPU, CSM/SBR, NBR, nylon and many others.

color: yellow, pink, purple, green, black, beige and many others.

floor: easy

tensile power: 8-55Mpa

hardness: 70-98Shore A

elongation: four hundred%-650%

density: 1.25g/cm3

elasticity influence: &gt25%

tear toughness: 35-155KN/m

akron abrasion reduction:&lt0.05cm3/one.61km

compression set (22h*70&degC):&lt10%

doing work temperature: 120&degC

regular dimension for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/a hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

normal size for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-ten, NOR-MEX214-ten, NOR-MEX240-10, NOR-MEX265-ten

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 1We are company, engineer had abundant encounter above 20 years. 2J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #2, #3, #four, #five, #6, #eight

GR42, GR48, GR55, GR65, GR75

regular dimensions for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM &amp custom-made measurement are agreed

special provide all kinds of metal coupling for FCL, NM, MH, HRC, Love Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls validate kind, measurement variety and quantity***

Tags:

rubber coupling

As one of leading rubber coupling manufacturers, suppliers and exporters of products, We offer rubber coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rubber coupling

Recent Posts