Black Color Rubber Coupling, Rubberhigh quality Spider, Rubber Coupling Spider

Design NO. 3A2006 Trademark 3A Rubber Specification as for every the customer&primes normal size Origin China HS Code 4016931000

Merchandise Description

Black Colour Rubber Coupling, Rubber Spider, Rubber Coupling Spider (3A2006)

Description: the polyurethane elastomeric is a new material of polymer synthetic amongst rubber and plastic. It has equally large toughness of plastic and high elasticity of rubber. Its qualities are: one, a vast range of hardness. It even now has rubber elongation and resilience at substantial hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. two. substantial toughness. At rubber hardness, the tensile toughness, tear toughness and load carrying potential are significantly larger than common rubber substance. At high hardness, its affect toughness and flexural strength are significantly greater than plastic material. 3, put on-resistant. Its wear resistance is extremely excellent, usually in the variety of .01-.10cm3/one.61km, about 3-5 instances than rubber substance. four, oil resistant. The polyurethane elastomeric is a hugely polar polymer compound which has low affinity with non-polar mineral oil and is rarely eroded in fuel oil and mechanical oil. 5, excellent resistance to oxygen and ozone. six, excellent vibration absorption functionality, can do damping and buffering. In the mould production industry, it replaces rubber and springs.seven, has great reduced temperature functionality. 8, radiation resistance. Polyurethane is highly resistant to high power radiation and has satisfactory performance at 10-ten deg radiation dose. 9, with excellent machining functionality.

The polyurethane coupling, rubber coupling are made by injection with substantial good quality TPU content or mould CSM/SBR. It is developing and special for all kinds of steel shaft coupling with quite good efficiency of higher tensile power, high dress in resistant, higher elastic resilience, water resistant, oil resistant and exceptional exhaustion resilience, higher influence resistant and so on. We have full sets injection moulds and supply complete assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J sequence couplings etc. with high good quality and exceptional encounter. Utilize to all sorts of industrial metallic shaft coupling.

Technical specs:

materials: TPU, CSM/SBR, NBR, nylon and so on.

coloration: yellow, purple, purple, green, black, beige and many others.

surface area: clean

tensile power: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: 1.25g/cm3

elasticity impact: &gt25%

tear strength: 35-155KN/m

akron abrasion loss:&lt0.05cm3/1.61km

compression set (22h*70&degC):&lt10%

working temperature: 120&degC

regular measurement for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40With “Buyer 1st, quality 1st”R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

common dimensions for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/one hundred, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-10, NOR-MEX240-ten, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Equipment 3J, 4J, 5J, 6J, 7JWe are currently exporting our merchandise through the entire world, specifically to North The united states, South The usa, Europe, and Russia. If you are interested in any product, make sure you do not hesitate to contact us. We are hunting forward to becoming your suppliers in the near future., 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #one, #two, #3, #4, #five, #six, #8

GR42, GR48, GR55, GR65, GR75

standard measurement for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM &amp custom-made dimension are agreed

particular offer all kinds of metal coupling for FCL, NM, MH, HRC, Love Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls affirm sort, measurement number and amount***

Fundamental Data.

Model NO. 3A2006 Trademark 3A Rubber Specification as for every the consumer&primes standard dimensions Origin China HS Code 4016931000

Merchandise Description

Buyer Issue &amp Answer Inquire some thing for more information ()

Black Shade Rubber Coupling, Rubber Spider, Rubber Coupling Spider (3A2006)

Description: the polyurethane elastomeric is a new content of polymer synthetic in between rubber and plastic. It has each high strength of plastic and higher elasticity of rubber. Its attributes are: one, a vast range of hardness. It even now has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness variety of Shore A10-D80. two. large power. At rubber hardness, the tensile toughness, tear toughness and load carrying capacity are much greater than basic rubber content. At large hardness, its impact toughness and flexural toughness are significantly larger than plastic content. three, use-resistant. Its wear resistance is quite excellent, normally in the variety of .01-.10cm3/one.61km, about 3-five times than rubber material. 4, oil resistant. The polyurethane elastomeric is a extremely polar polymer compound which has minimal affinity with non-polar mineral oil and is barely eroded in gasoline oil and mechanical oil. 5, excellent resistance to oxygen and ozone. 6, exceptional vibration absorption functionality, can do damping and buffering. In the mildew manufacturing market, it replaces rubber and springs.seven, has very good reduced temperature performance. eight, radiation resistance. Polyurethane is very resistant to large vitality radiation and has satisfactory functionality at 10-ten deg radiation dose. nine, with excellent machining functionality.

The polyurethane coupling, rubber coupling are manufactured by injection with higher quality TPU content or mould CSM/SBR. It is developing and specific for all kinds of metal shaft coupling with really good efficiency of higher tensile toughness, large put on resistant, large elastic resilience, water resistant, oil resistant and excellent fatigue resilience, high influence resistant etc. We have full sets injection moulds and offer total assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J collection couplings and so on. with substantial top quality and exceptional expertise. Implement to all kinds of industrial steel shaft coupling.

Requirements:

materials: TPU, CSM/SBR, NBR, nylon and so forth.

color: yellow, red, purple, inexperienced, black, beige etc.

area: clean

tensile strength: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: 1.25g/cm3

elasticity influence: &gt25%

tear strength: 35-155KN/m

akron abrasion loss:&lt0.05cm3/one.61km

compression established (22h*70&degC):&lt10%

operating temperature: 120&degC

regular dimensions for polyurethane coupling:

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, Gsplit sprocket,roller chains sprocket,specification normal chains sprocket,bulldozer sprocket,tapered bore sprocket,blank sprockets,industrial sprockets,standard sprocket,conveyor sprockets,loafer sprockets,spline shaft with sprocket,roller chain idler sprocket,excavator observe sprockets,chain sprocket kit,belts push sprockets,weld on sprocket,chain sprockets with bearing,sprockets for conveyor,sprockets assembly,sprocket flat top chains,large sprocket, double row sprocket,single sprocket,excavator sprocket wheel,triplex sprockets,cast iron sprocket,agricultural chain sprocket,timing sprocket,ansi standard for sprocket,stainless steel sprocket chain sprocket,higher quality sprockets,sprockets with spline,roller sprocket,agricultural equipment sprockets,transmission sprocket,industrial chain sprocket,wheel sprocket,ansi sprockets,chain wheel sprocket,sprocket plate wheel duplex sprocketS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/one hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 0010, 0020, 2035, 2035A, 3545, 4560, 6070, 7080

MS0511, MS0714, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

regular dimensions for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/one hundred, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-10, NOR-MEX214-ten, NOR-MEX240-ten, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #one, #two, #three, #four, #five, #6, #8

GR42, GR48, GR55, GR65, GR75

standard size for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM &amp personalized dimensions are agreed

specific supply all kinds of metal coupling for FCL, NM, MH, HRC, Adore Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls validate variety, measurement quantity and quantity***